IC Verify Errors - the following error messages are copied directly from IC Verify's website
BUSY
The phone number the modem is dialing is busy.
CORRUPTED TRANSACTION FILE
The program has encountered inconsistencies that have been found in the transaction file.
INVALID CARD #
The card number you have entered did not pass the test for Valid Card Number (number was probably mistyped). Check the number and correct your entry. OR, the card that was passed through the Card Reader is not an acceptable card for this type of transaction on your system. OR, the merchant is not set up to accept this card type.
MODEM NOT RESPONDING
Incorrect port, invalid modem string or incorrect phone number.
NO CARRIER
The communications line has dropped. Retry the transmission.
NO DIALTONE
The modem did not receive a dialtone when attempting to dial. Check the phone connection.
NO TRANSACTIONS ON FILE!
There are no transactions on file for the report you have selected.
NOT APPROVED + [message]
The transaction has not been approved.
NOT APPROVED - TIME OUT
The transaction has not been approved due to a Time Out on the call. Press ENTER to try again.
RESPONSE
(Approval Code or other message) During Off-Line Group Transmission, each transaction number is displayed while it is being transmitted, followed by the above message.
TIME OUT
Modem has failed to connect to processor or processor has not responded before time set in Hardware setup (wait time for connect). Additional reason may be given.
WAITING FOR ANSWER
The Modem is waiting for an answer at the Card Processor number. Press ESC to cancel the transaction.
WAITING FOR NETWORK RESPONSE
Part of the communication procedure when dialing the Host. The X-Charge software is waiting for the Card Processor to respond.
QD+number (Example: QD873459875) when settling your batch
You probably need to change your batch number. Please call your processor to find out what batch number your supposed to be on. In IC Verify click Utilities - Reset batch number, and change to the new number.